Refrigerator Door Hinge for Reversing Door

This is the left or right hinge designed for the door of the absorption refrigerator, which is used when reversing the refrigerator door. It is an essential component for changing the door-opening direction.

Installation Steps:

1. First, use a screwdriver to loosen and remove the screws of the lower hinge, then carefully lower and remove the door.

2. Remove the two screws from the right-top hinge position, take off the metal part on the hinge.

3. Remove the two screws from the left-top hinge (where this left hinge is located), take off the hinge, insert the previously removed metal part, and then rivet the two screws.

4. After that, take off the lower hinge and fix it to the opposite side.

5. Insert the lower hinge axle into the left-bottom hole of the door.

6. Fix the spare hinge (which is used in place of the original left hinge on the new side) to the right-top position of the cabinet, and adjust the door to make it straight and aligned with the cabinet.

Please note that after reversing the door, the door gasket may need to be reset. If there is a gap between the cabinet and the door gasket, gently pull the gasket to seal the gap. You can also use a hair dryer to warm the gasket to eliminate the gap for better sealing.

This hinge is made of high-quality materials, ensuring durability and stable performance during the door-reversing process. It is specifically designed to be compatible with the SMAD absorption fridge, providing a reliable solution for changing the door-opening direction of your refrigerator.